Systems
Medical gas systems
Oxygen generation, medical air, vacuum and the pipelines that carry them to the bedside. This is where KBM began in 2007 and where most of its installed base sits.
Gases and services
- Oxygen (O₂)
- Patient oxygen therapy; supplied by PSA generation, liquid oxygen or cylinders.
- Medical air
- Breathing and ventilator support; requires controlled quality and filtration.
- Medical vacuum
- Clinical suction, generated by dedicated vacuum pumps.
- Nitrous oxide (N₂O)
- Anaesthesia gas where clinically specified; requires dedicated safeguards.
- Carbon dioxide (CO₂)
- For selected surgical and laboratory applications.
- Specialty gases
- Nitrogen, instrument air and specialty mixtures where the clinical scope calls for them.

The range
Oxygen supply
- PSA and VPSA oxygen generators
- Medical oxygen low-pressure systems
- Liquid oxygen tanks and cryogenic plants
- Oxygen filling stations
- Portable oxygen generator systems
- Oxygen trucks
Plant
- Medical air plants
- Vacuum systems
- Cylinder manifolds for reserve supply
Distribution
- Medical gas pipeline systems (MGPS)
- Terminal outlets, zone valves and area alarms
- Pressure monitoring and remote monitoring
Continuity power
- Solar-based hybrid systems
- Battery storage
- Energy management and monitoring





Inside a PSA oxygen plant
A pressure swing adsorption (PSA) plant makes medical oxygen from ambient air, on site, in five stages.

- Air intake and compressionAmbient air compressed to the required pressure.
- Air treatmentDrying and filtration to achieve clean, dry air.
- PSA generationPressure swing adsorption produces medical oxygen at 93% ± 3%.
- Oxygen storageA receiver tank for stable supply and buffering.
- Cylinder fillingA high-pressure booster and manifold fill cylinders to 150–200 bar.
From plant room to bedside
A medical gas pipeline system carries oxygen, medical air and vacuum from the plant room to wards, intensive care, emergency and operating theatres, with zone valves, area alarms and pressure monitoring along the way.

How an oxygen plant is delivered
- Site readinessCivil works, electrical supply, earthing, ventilation and a layout with safe access and room to expand.
- Equipment installationCompressor, dryer, air receiver, filtration, PSA generator, oxygen receiver and control system positioned, aligned and anchored.
- System integrationOxygen pipeline to the hospital, cylinder filling system, power distribution, control wiring and alarms.
- Testing and handoverPurity, flow, pressure, alarm and leak tests; operator training; test reports, manuals and as-built documentation.
The sequence and duration of each project depend on the approved design and on site readiness.
Standards we work to
- WHO technical specifications for medical oxygen systems
- HTM 02-01 (medical gas pipeline systems)
- ISO 7396-1 (medical gas pipeline systems)
- ISO 9170-1 (terminal units)
- Colour coding and clear pipeline identification
- Zoning, isolation and maintenance access
Training
More than 600 health workers trained in oxygen management and maintenance, so that systems keep working after handover.
Manufacturers
KBM works in partnership with 7 of the 12 manufacturers on the Global Fund’s list of medical oxygen generators. See the manufacturers
On site




